Description

Installation

The device installation is extremely user friendly and easy:

1. Remove the Co2 gun base abd the power connector from the brieftcase.

2. Place the base on a flat surface in the treatment room near a power outlet.

3. Connect the gun base through its front side to the power outlet, using the power connector.

4. Place the gun on its base to start charging it. The base logo will turn on and the screen will display the charge action.

5. After thegun is charged, the logo will turn off.

6. Place the 24units’kits next to the gun case, so that they can easily reached when starting a treatment.

Usage

1) Take one of the treatment kits from the 25 units display box and open it. Take the lifting cosmetic product bottle out and remove the blue cover. a rubber cover surrounded by a metal ring will become visible.

2) Remove the gun from its base and attach the hand strap to it. Both the gun logo and the screen will turn on. Place the container in its place, in the upper part of the gun, with the rubber cover facing downwards, pressing on it until the needles penetrate the rubber cover.

3) Remove the cartridge from its box and screw it quick and tightly on the CO2 Gun back side, to the top, going over the first stop, so that it is secure. Never remove the cartridge by unscrewing it in this phase or any other situation until the 4 full minutes of spray have ended.

4)When everything is ready, the gun will display the CO2 gun screen.

How does it works?

The session

Simple, effective, non-invasive and fast treatment: 5 minutes open a new future for facial rejuvenation. Symbiosis between a large concentration of anti-aging actives and an efficient activation of the epidermis allows it to penetrate as it was never attained before.

Application Zones

Co2 gun is designed to easily and quickly treat the whole face, in order to obtain a general lifting effect that smoothens and illuminates the skin, paying special attention to the areas most sensitive to wrinkles, both due to expression and to gravity: eyes outline, forehead, frown, cheeks and lips’ area.

1) Take one of the treatment kits from the 25 units display box and open it. Take the lifting cosmetic product bottle out and remove the blue cover. a rubber cover surrounded by a metal ring will become visible.

2) Remove the gun from its base and attach the hand strap to it. Both the gun logo and the screen will turn on. Place the container in its place, in the upper part of the gun, with the rubber cover facing downwards, pressing on it until the needles penetrate the rubber cover.

3) Remove the cartridge from its box and screw it quick and tightly on the CO2 Gun back side, to the top, going over the first stop, so that it is secure. Never remove the cartridge by unscrewing it in this phase or any other situation until the 4 full minutes of spray have ended.

4)When everything is ready, the gun will display the CO2 gun screen.

Welcome to send inquiry to our mesotherapy gun suppliers and manufacturers, we will provide our best products and service to meet your requirements.