Portable Deisgn High Energy Q Switched ND YAG Laser


SKU: C5 Category:


Q switched nd yag laserWorking Principle 
The special wavelength of YAG laser can penetrate skin of human body accordingto the theory and practice of "selective laser decomposing", the instrument usesthe laserwave to break Chromatophore into pieces which can be naturally absorbed by the body. So that it achieves the purpose of de-freckling. 
The 1064nm wavelength will shatters and removes the black and blue pigments while the 523nm wavelength will shatters and removes red, pink, purple and brown pigments of the tattoo or other pigmentations without damaging the normaltissue.

Instruction :

As an upgrading version of mini Q-switch Nd:YAG laser tattoo removal, the C5P model can work for longer time with stable output, and more improvements in detail. A short pulse (shorter than 20ns) of laser beam emitted by the Q-switch Nd:YAG laser machine is selectively absorbed by the melanosome or the tattoo ink located in the epidermal & dermal skin layers. Pigmented lesions are all made of an over abundance of melanosomes in the skin. The laser energy causes the melanosome or tattoo ink to fragment into smaller pigment particles that are removed by your body’s immune system.

The mini Q-switch Nd:YAG laser tattoo removal can be used for multiple applications. Equiped with the high efficiency laser generator and power supply, it is effcient for tattoo removing, speckle/spot removing, ota or freckle removing, etc. "Age spots" usually require only one to three treatments. Conditions, such as Nevus of Ota, freckles, and other superficial skin discolorations may be removed in two to four treatments. In the case of tattoos, amateur tattoos usually require three to five treatments while professional tattoos may require six or more treatment sessions. Fading of the tattoo will continue in between treatment sessions as more ink is removed by your body. When more than one session is required, treatments should be spaced four to eight weeks apart to allow your body’s natural immune system to remove the maximum amount of pigment or ink particles in between sessions.


The system gem_adjusting Q switch can effectively curethe mixed pigments by pigment precipitation of extraneous source withpathological pigment change of endogenous source, inclusive of erroneous darkeyebrow-embroidery, lip-embroidery, lip-soak, eye line-embroidery, lipline,tattoo (inclusive of tattoo by extraneous wounds), pigment precipitation bysensitive source, freckle on female’s face (male’s), coffee spot, old agespot, black mole, and birthmark in black, blue, purple, brown, red and etc.Treatment course for different illness case as follows:

1. 1064nm Wavelength: Remove black and dark blue tattoo pigments, such as tattoos, eyebrows, dark color around the eyes, freckle, age spot etc.
2. 532nm Wavelength: Remove red and brown tattoos and red mark.
3. 1320nm wavelength: The 1320nm wavelength: Skin whitening and rejuvenation. 


High energy (500W) laser output, so with least scar after treatment
Adjustable wavelength at 1064nm or 532nm, swiching on handpiece with one finger
Improved KPT filter for stable output in precise wavelength
Energy will not decline within 2 years
Permanently removal of pigment, safe treatment and low risk of scarring
High frequency up to 10 shots per second
Unnecessary to use the cream to numb the patients’ skin
Quick recovery, low down time. After treatment, the slight edemais will disappear within a few days
High mobility – one of the smallest high energy laser in the world

Treatment range

The system gem-adjusting Q-switch can effectively cure the mixed pigments by pigment precipitation of extraneous source with pathological pigment change of endogenous source, inclusive of erroneous dark eyebrow-embroidery, lip-embroidery, lip-soak, eye line-embroidery, lip-line, tattoo (inclusive of tattoo by extraneous wounds), pigment precipitation by sensitive source, freckle on female’s face (male’s), coffee spot, old age spot, black mole, and birthmark in black, blue, purple, brown, red and etc.

Before & after treatment by laser

1. Preparation before treatment by:

No inflammation in the treatment part.

No treatment for pregnant woman.

Fomentation on the treatment part avoid skin dehydration.

No cosmetic left, clean the treatment part.

Taking photo before treatment, compare the effect after operation. 

2. Skin appearance after treatment:

Reddish swelling on treatment part on the moment, it will disappear shortly. 

To some special customers need to be higher, when you make the Volt too high, there comes the scab, but it will drop off naturally after 7 days, not to scratch it, skin becomes normally about 2 days. Taking some Vitamins can lighten the pigment circumfluence. Usually there is a feeling of scorching or slight bleeding; it is normal and no scar.

When the scabs fade away, the treatment part shows pink, weeks later it appears coffee color, and 1-2 months later recover.

3. Care after treatment:

1)You may clean the skin with non-stimulator water after treatment.

2) If there is slight bleeding when adjust the Volt higher, please wipe off and smear the Antiphlogistin (such as Illotycin) until the scar drops off. Not cosmetic or other medicines.

3)If the treatment parts is flush and feeling it not comfortable, can do ice compress.

4)Before the scab dropping off, the treatment part must be care not to touch water, not being scratching, avoiding certain food of hot, dark color of coffee, Coco Cola etc. Prohibit smoking and drinking .Let the scabs desquamate naturally not scale off in a force.Not taking plenty of sports avoiding of sweat infection. 

After the scab desquamating, No need to coat the Illotycin (Erythromycin) again, just smear the suntan lotion (SPF15 upwards) even in the room preventing UVA/UVB and keep along 3 to 6 months because of the treatment skin sensitivity to the sunlight. Using suntan lotion or umbrella preventing can improve the effect early.

Period for laser treatment: According to the different treatment parts and pigment dark or not, the treatment may be several times. Normally one period of treatment is 1-2 times, every time at 20-30 days interval. If there is no special, every 2-4 weeks go to clinic check again, if there is anything abnormally, please cure it early.Pigment fadeaway is a slow process, for the pigmentation skin, normally it is 1-3 months. In order to get more favorable effect, repeated treatment should be 1-3 months interval.

Nd yag laser tattoo removal machine treatment Q &A:

Q: Am I a candidate for tattoo removal?

A: Our laser can treat virtually all ink colors on all skin tones. Laser tattoo removal is the best option for those looking to remove unwanted ink, and there are very few contraindications to the treatment.

Q: How long does it take?

A: Treatments are very fast, and most tattoo removal appointments take 15 or 30 minutes at maximum. The actual treatment time is typically less than 3-5 minutes while some last just under 10 seconds.

Treatments are scheduled a minimum of six weeks apart to allow for quality ink elimination and skin healing between sessions.

Q: Can most tattoos be treated?

A: The majority of tattoos respond to laser treatments. Some pigments, especially green, orange and yellow are more difficult than other colors to eradicate, but even they usually respond following a prolonged course of treatments. What separates Beloved Laser Tattoo Removal from other laser tattoo removal clinics is that our technology removes the full spectrum of colors rather than just a few certain colors.

Q: Does Laser Tattoo Removal treat minors?

A: Yes. Any patient under 18 years of age can be treated with parental/guardian consent.

Q: Does laser tattoo removal hurt?

A: Laser tattoo removal can sting a little and feels like having an elastic band snapped against the skin. Beloved Laser Tattoo Removal owns and operates a Q-Plus C laser, which is the most powerful laser on the market as well as one of the most gentle on the skin. In the past, laser tattoo removal was relatively unpleasant; technology has matured a great deal.

Q: How many laser tattoo removal treatments are needed?

A: The number of treatments needed to remove a tattoo depends on its size, color, and the depth of penetration of the ink among other factors. An amateur tattoo may need 2-5 treatments. A professional multi-colored design might need 3-15 or more treatments.

Typically after the first or second treatment is when the number of treatments can be better estimated. If you’d like to lighten a tattoo so you can cover it with a new one, the number of laser treatments will likely be 25% to 50% fewer than those needed to completely remove a tattoo.
  Nd Yag Laser Details


Laser type DKDP & KTP Nd: YAG Laser
Wavelength 1064 nm / 532 nm /1320nm
Output 200mJ (1064nm), 100mJ (532nm) 
Single-pulse Energy 700mJ (1064nm); 350mJ (532nm)
Power 500W
Spot Size 1~5mm
Pulse Width < 20ns
Repetition Rate Up to 10Hz
Laser YAG bar φ7 or φ6 φ7
Packaging Details 57x32x42cm,15Kg

   Why you choose us Beijing Sea Heart International Science and Technology  Co.,Ltd.is a professional medical and beauty equipment manufacturer,specializing in research and development, production, sale and after-sale service. One of the earliest beauty instrument manufacturer of China. Products include many  technology areas of laser, light, microwave, radio frequency, ultrasonic, etc. The main products are ND: YAG Q-Switch tattoo removallaser machine,  E light skin rejuvenation machine, RF series machine, C02 fractional laser machine, LED light power  and other series. Products are exported to the  Americas, Europe, Middle East, Africa and Southeast Asia.  Our products are widely  used  in various  large and middle hospitals, specialty hospitals dermatology, plasticsurgery,  professional salons,  good comments are received from majority of customers and the patients.   FAQS1. Are you a factory or just a trading company?We are thte real professional beauty machines manufacturer,which has a toal staff of 80 and possesses our own factory with an area of 2000 square meters. You create market, we do production for you !

2. How does your factory do regarding quality control ?
We have a strictly quality inspection department. Our engineers will carefully check and test the machines many times before we deliver them to you. To make sure you can get the high quality machines, only the machines that have passed the strict quality inspection can be delivered to you.

3. Do you offer OEM and ODM services?
Yes, we can offer you better OEM and ODM services. We have our own R&D department with 20 experienced designers and engineers and many production lines , so we have the great capacity to offer you high quality beauty machines according to your needs, ideas and samples.

4. Where is your factory located ?
Our factory is located in No.8, zizhuceng, Chaoyang District, Beijing, China. If your time is available, you are warmly welcome to come to China to visit our factory !!

5. Do you have any warranty? 
Yes, we have. One year warranty on host machine is given. Six months free replacement warranty for handles, treatment heads, and parts.

6. How is your after-sale service? 
We have a professional technology supporting team for your timely services. You can get the help you need in time by telephone, webcam, online chat (Google talk, Facebook, Skype,Whatapp). Please contact us once the machine has any problem. Best service will be offered.

7. What certification do you have? 
All of our machines have the ISO13485, FDA, CE certification which ensures the quality and safety. Our machines are under strict quality management to ensure good quality. Because we fully understand that it will be a great trouble if machine have any problem during working at oversea.

8. Will you teach how to use the machine? 
Yes, we can provide a complete user manual and usage video for instruction and application. And 24/7 online consultant service ensure you whatever problem and whenever you meet, you can solve easily. It is easy to operate by anyone with the instructions.

9. How about the shipment? 
The machine will be shipped within 2-3 days after the receipt of your payment. 

 Contact us now Tina – Sales Representative Professional Saleswoman.We can help to solve any problem if customers need.we hope to develop a good and long term cooperation .
© SEA HEART GROUP LIMTED. All Rights Reserved.

Source your reliable q switch nd yag laser machine suppliers and manufacturers here, we would meet your requirment with our best service and products.